远大创新旗下网站:B1B.COM
Cycle-chips Components Inc.
制造商型号制造商描述批次库存(最小起订)价格阶梯香港交货国内交货(含税13%)货期(工作日)操作
SN74AVCH2T45DCUR TI 具有可配置电压转换和 3 态输出的双位双电源总线收发器 18+ 深圳:174 (14+)

1 +

-

¥3.7501

5-7工作日
TLV62569PDDCR TI TLV62569 器件是一款同步降压 DC-DC 转换器,专门针对高效和紧凑型解决方案进行了优化。该器件集成的开关能够提供高达 2A 的输出电流。; 在中等负载或重载条件下,该器件运行在脉宽调制 (PWM) 模式下,开关频率为 1.5MHz。在轻载情况下,该器件自动进入节能模式 (PSM),从而在整个负载电流范围内保持高效率。关断时,流耗减少至 2µA 以下。; TLV62569 的输出电压可通过一个外部电阻分压器进行调节。内部软启动电路可限制启动期间的浪涌电流。此外, 还内置了 诸如输出过流保护、热关断保护和电源正常输出等其他特性。该器件提供 SOT23 和 SOT563 两种封装。 2105 深圳:85 (11+)

1 +

-

¥4.8408

5-7工作日
TPS61021ADSGR TI TPS61021A 为由碱性电池、镍氢电池、锂锰电池或锂离子电池供电的便携式或智能设备提供了一套电源解决方案。TPS61021A 能够在电池放电至 1.8V 的低电压时提供 3.3V 电压和 1.5A 电流输出。TPS61021A 支持 0.5V 输入电压,从而延长了电池的运行时间。; TPS61021A 在重负载条件下以 2MHz 开关频率工作,并且可在轻负载时进入省电模式,从而在整个负载电流范围内保持高效率。该器件在轻负载条件下从 V; 仅消耗 17μA 静态电流。在关断期间,负载与输入完全断开。此外,TPS61021A 还提供有 4.35V 输出过压保护、输出短路保护和热关断保护。; TPS61021A 需要使用的外部组件数量较少,因此拥有非常小巧的解决方案尺寸。该器件支持在 2MHz 开关频率下使用低值电感或输出电容。; TPS61021A 采用 2.0mm x 2.0mm WSON 封装。 深圳:0 (20+)

1 +

-

¥2.5815

5-7工作日
SN74AVC4T245DGVR TI 具有可配置电压转换和三态输出的 4 位双电源总线收发器 深圳:0 (15+)

1 +

-

¥3.4696

5-7工作日
TPS61235PRWLR TI The TPS6123x is a high current, high efficiency synchronous boost converter with constant output current feature for single cell Li-Ion and Li-polymer battery powered products, in a wide range of power bank, tablet, and other portable devices. The IC integrates 14-mΩ/14-mΩ power switches and is capable of delivering up to a 3.5-A output current for 3.3-V to 5-V conversion with up to 97% high efficiency. The device supports a programmable constant output current to control power delivery, so to save power path components and lower total system thermal dissipation effectively.; The device only consumes a 10-µA quiescent current under a light load condition, and can report load status to the system, which make it very suitable for Always-On applications. With the TPS6123x, a simple and flexible system design can be achieved, eliminating external power path components, saving PCB space, and reducing BOM cost.; In shutdown, the output is completely disconnected from the input, and current consumption is reduced to less than 1 µA. Other features like soft start control, reverse current blocking, over voltage protection, and thermal shutdown protection are built-in for system safety.; The devices are available in a 2.5-mm × 2.5-mm VQFN package. 2141 深圳:0 (9+)

1 +

-

¥5.8069

5-7工作日
LMR16006YDDCR TI The LMR16006 is a PWM DC/DC buck (step-down) regulator. With a wide input range of 4 V to 60 V, it is suitable for a wide range of application from industrial to automotive for power conditioning from an unregulated source. The regulator’s standby current is 28 µA in ECO mode, which is suitable for battery operating systems. An ultra low 1 µA shutdown current can further prolong battery life. Operating frequency is fixed at 0.7 MHz (X version) and 2.1 MHz (Y version) allowing the use of small external components while still being able to have low output ripple voltage. Soft-start and compensation circuits are implemented internally, which allows the device to be used with minimized external components. The LMR16006 is optimized for up to 600 mA load currents. It has a 0.765 V typical feedback voltage. The device has built-in protection features such as pulse by pulse current limit, thermal sensing and shutdown due to excessive power dissipation. The LMR16006 is available in a low profile SOT-6L package. 深圳:0 (12+)

1 +

-

¥4.4368

5-7工作日
TLV62568DBVR TI TLV62568 器件是一款同步降压 DC-DC 转换器,专门针对高效和紧凑型解决方案进行了优化。该器件集成的开关能够提供高达 1A 的输出电流。; 在中等负载或重载条件下,该器件运行在脉宽调制 (PWM) 模式下,开关频率为 1.5MHz。在轻载情况下,该器件自动进入节能模式 (PSM),从而在整个负载电流范围内保持高效率。关断时,流耗减少至 2µA 以下。; TLV62568 的输出电压可通过一个外部电阻分压器进行调节。内部软启动电路可限制启动期间的浪涌电流。此外, 还内置了 诸如输出过流保护、热关断保护和电源正常输出等其他特性。该器件提供 SOT-23 和 SOT563 两种封装。 2206 深圳:0 (88+)

1 +

-

¥0.5714

5-7工作日