业界功耗最低、尺寸最小的高性能无线MCU

解决方案

汽车电子

工业应用

消费电子

物联网

新能源

edpine Signals RS14100 WiSeMCU™ family of SoCs and modules are the industry's first Wireless Secure MCU family with a comprehensive multi-protocol wireless sub-system. It has an integrated ultra-low-power microcontroller, a built-in wireless subsystem, advanced security, high performance mixed-signal peripherals and integrated power-management

Solution Highlights: Efficient on-chip application processor based on ARM® Cortex®-M4F with up to 180 MHz performance, up to 4 MB dedicated flash; Co-existence of multiple wireless protocols including 802.11a/b/g/n (2.4 GHz and 5 GHz), dual-mode Bluetooth 5 and 802.15.4 (capable of running Thread or ZigBee®); Ultra-low power consumption with multiple power modes to reduce the system energy consumption; Multiple levels of security including PUF (Physically Unclonable Function), Crypto HW accelerators, Secure Bootloader and Secure Zone to create a highly secure system; Fully integrated and wireless certified modules with multiple sizes as small as 4.63 mm x 7.90 mm; Integrated networking and wireless stacks for ease of integration; Leading edge RF performance providing long range and higher throughputs; Unique peripherals like ULP sub-system, voice activity detection (VAD) and up to 8 capacitive touch sensor inputs

Block diagram

Features
Package Options
Part Numbers

Microcontroller: ARM Cortex-M4 core with up to 180 MHz; Integrated FPU, MPU and NVIC; SWD and JTAG debug options; Internal and external oscillators with PLLs; Flash In-Application Programming (IAP), In-System Programming (ISP) and Over-the-Air Wireless Firmware Upgrade; Power-On Reset (POR), Brown-Out and Black-out Detect (BOD) with separate thresholds

Memory: Up to 4 MB integrated Quad-SPI flash with inline AES engine and XIP; Up to 400 KB SRAM; 4-way set-associative 16KB I-Cache

Security: HW device identity and key storage with PUF; Trusted Execution Environment with Secure Boot loader; Accelerators: AES128/256, SHA256/384/512, RSA, ECC, ECDH, RNG, CRC

Wi-Fi: Compliant to single-spatial stream IEEE 802.11 a/b/g/n with dual band (2.4 and 5GHz) support; Support for 20 MHz and 40 MHz channel bandwidths; Transmit power up to +20 dBm₁ with integrated PA; Receive sensitivity as low as -97 dBm₁; Application data throughput up to 40 Mbps₁ in TCP mode

Bluetooth: Compliant to dual-mode Bluetooth 5; Transmit power up to +20 dBm1 with integrated PA; Receive sensitivity as low as -104 dBm₁; Data rates: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps, 3 Mbps

802.15.4₂: Compliant to IEEE 802.15.4, 2.4 GHz; Transmit power up to +20 dBm₁ with integrated PA; Receive sensitivity of -102 dBm₁

RF Features: Integrated baseband processor with calibration memory, RF transceiver, high-power amplifier, balun, T/R switch and flash memory; Dual external antenna (diversity supported)

Wake-Fi_™2: Ultra-low power wake-up receiver with secure wakeup pattern to prevent battery drain attack

Embedded Wi-Fi Stack: Support for Embedded Wi-Fi Client mode, Wi-Fi Access point mode, Wi-Fi Direct and Enterprise Security; Supports advanced Wi-Fi security features: WPA/WPA2-Personal and Enterprise (EAP-TLS, EAP-FAST, EAP-TTLS, EAP-PEAP, EAP-LEAP, PEAP-MSCHAP-V2); Integrated TCP/IP stack (IPV4/IPV6), HTTP/HTTPS, DHCP, ICMP, SSL 3.0/TLS1.2, Web sockets, IGMP, DNS, DNS-SD, SNMP, FTP Client; Wi-Fi firmware upgrade and provisioning; Support for concurrent Wi-Fi, dual-mode Bluetooth 5 and 802.15.4₂

Embedded Bluetooth Stack: EDR+2.1, 4.0, 4.1, 4.2 and 5.0; BT LE 1 Mbps, 2 Mbps and Long Range modes; Piconet and scatternet; BT profile support₁ for SPP, A2DP, AVRCP, HFP, PBAP, IAP, GAP, SDP, L2CAP, RFCOMM, GATT, IAP1, IAP2

Embedded Zigbee Stack: ZigBee PRO and Thread stack embedded; Supported modes: ZigBee Coordinator, Router₁ , End device; Supported profiles: Zigbee Light Link (ZLL), Home Automation (HA) and Smart Energy (SEP)

MCU Sub-system Power Consumption: Active current of 15uA/MHz ₁ in low power mode; Deep sleep mode current: 400 nA₁; Dynamic Voltage & Frequency Scaling; Deep sleep mode with only timer active - with and without RAM retention

Wireless Sub-system Power Consumption: Wi-Fi standby associated current of < 50 uA₁(2.4 GHz); Wi-Fi tx current = 220 mA₁, rx current of 40 mA₁(2.4 GHz); < 5 mA₁ transmit current in BT 5 mode, 0 dBm output power, 2 Mbps data rate

Digital Peripherals: USB HS OTG with integrated HS transceiver; 10/100 Mbps Ethernet MAC with RMII; SDIO 3.0 host and slave, SD/eMMC; 3x USART, 4x SPI, 3x I2C, 2x I2S, SIO, CAN 2.0B; Timers: 5x 32-bit, 1x 16/32-bit, 1x 24-bit, WWDT, RTC, RIT, QEI; Up to 85 GPIOs with GPIO multiplexer

Analog Peripherals: 12-bit 16-ch, 5 Msps ADC, 10-bit DAC; 3x op-amps, 2x Comparators and Temperature Sensor; 8 capacitive touch sensor inputs; Voice Activity Detection (VAD)

Software and Regulatory Certifications: Wi-Fi Alliance₂; ZigBee Certification₂, Bluetooth Qualification₂; Regulatory certifications (FCC, IC, CE, ETSI, TELEC)₂

Operating Conditions: Single supply: 2.1 to 3.6V or 1.85V; Operating temperature: -40°C to +85°C (Industrial grade)

Packages: Modules with and without integrated antenna; SoC packages - WLCSP, QFN and BGA

Evaluation Kit: P/N: RS14100-EVK1

Module Packages SoC Packages

Package Code	Package Type	Dimensions (mm)	Frequency Band	Integrated Antenna
CA0	LGA,173	9.1 x 9.8 x 1.2	Single Band (2.4 GHz)	No
CC0	LGA,173	9.1 x 9.8 x 1.2	Dual Band (2.4 / 5 GHz)	No
CA1	LGA, 107	15.7 x 15.0 x 2.2	Single Band (2.4 GHz)	Yes
CC1	LLGA, 107	15.7 x 15.0 x 2.2	Dual Band (2.4 / 5 GHz)	Yes
B00	LGA,126	4.63 x 7.90 x 1.2	Single Band (2.4 GHz)	No

Package Code	Type of Package	Dimensions, Pitch (mm)	Frequency Band
WMS	WLCSP, 79	3.51 x 3.60 x 0.5, 0.4	Single Band (2.4 GHz)
QMS	QFN, 84	7 x 7 x 0.85, 0.5	Single Band (2.4 GHz)
BTS	BGA, 196	6 x 6.3 x 0.9, 0.5	Single Band (2.4 GHz)

Part Number	Wireless	Other Wireless	CPU Freq	Flash+RAM	SoC Packages (ppg)	Module Packages (ppg)
RS14100-0B00-140F-ppg	BT5	-	100 MHz	4 MB+208 KB	QMS, WMS,BTS	B00
RS14100-SB00-140F-ppg	SB+BT5	-	100 MHz	4 MB+208 KB	QMS, WMS,BTS	B00, CA0, CA1
RS14100-SBT0-140F-ppg	SB+BT5+ZB/THR	-	100 MHz	4 MB+208 KB	QMS, WMS,BTS	B00, CA0, CA1
RS14100-SB00-240F-ppg	SBW+BT5	-	180 MHz	4 MB+208 KB	QMS, WMS,BTS	B00, CA0, CA1
RS14100-SBT0-240F-ppg	SBW+BT5+ZB/THR	-	180 MHz	4 MB+208 KB	QMS, WMS,BTS	B00, CA0, CA1
RS14100-SBT1-240F-ppg2	SBW+BT5+ZB/THR	Wake-Fi	180 MHz	4 MB+208 KB	QMS, WMS,BTS	B00, CA0, CA1
RS14100-DB00-140F-ppg	DBW+BT5	-	100 MHz	4 MB+208 KB	-	CC0, CC1
RS14100-DBT0-140F-ppg	DBW+BT5+ZB/THR	-	100 MHz	4 MB+208 KB	-	CC0, CC1
RS14100-DB00-240F-ppg2	DBW+BT5	-	180 MHz	4 MB+208 KB	-	CC0, CC1
RS14100-DBT0-240F-ppg2	DBW+BT5+ZB/THR	-	180 MHz	4 MB+208 KB	-	CC0, CC1
RS14100-DBT1-240F-ppg2	DBW+BT5+ZB/THR	Wake-Fi	180 MHz	4 MB+208 KB	-	CC0, CC1

Note: Replace 'ppg' with desired SoC / Module Packages code;

SB: Single Band Wi-Fi (2.4 GHz); DB: Dual Band Wi-Fi (2.4/5 GHz); ZB: ZigBee; THR: Thread

₁: Subject to change. Contact Redpine Signals for final numbers.

₂:Contact Redpine for availability